Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an entry on a DNS server for a domain "aa.bb.test.com" which points to 1.1.1.1 which is VIP address on the CSS at the primary site.i would like to add another css at another site as a backup. What exactly I have to do to configure the other cs...
Hi,1. First issueI have following commands in my pix configurationauth-prompt test_accept auth-prompt test_reject auth-prompt test_prompt however I am not getting any of them. Any idea why?2. Second issueWhich command do I enter so if my radius serve...
Hi,I would like to setup SPAN for a VLAN. 2 question I have are.1. Does it matter if the destination port is part of the same vlan or not?2. What is the cmd to cfg to setup SPAN port on 2950. I tried monitor session 1 source....but no luck.Thanks,Ilt...
Hi,Is it possible to have full access to the machine inside network (behind PIX using PAT) from outside? Not just a particular port but all ports for all the machines inside the network? if yes, please guide me.Thanks,Iltiaz
Thanks for the response.1.I tried it but no luck. I can see those command with show auth-prompt but I do not see any message when I logon to PDM. I tried with failed login but still no message. I am using Microsoft IAS Radius server.Any other suggest...
I agree. I don't remember what was the resolution for this problem when we had this. Only few machines were not getting windows update. Try updating other machine also.Let me know if that helps.Thanks,Iltiaz
if you are using nfuse or web interface, you will need to open 80 and 443.for further infohttp://support.citrix.com/kb/entry!default.jspa?categoryID=118&entryID=2075&fromSearchPage=truelet me know if that helps.Thanks,Iltiaz
