About abakhto

abakhto · 10-29-2004

I have a DS3 connection terninating to built-in DSU interfaces on 7204VXR at point A and 3660 router at point B.There are no errors on the DS3 circuit.When I copy a 200M file from point A to pint B the copy speed is 3 min. When I copy a 200M file fro...

abakhto · 05-26-2004

Does anybody have experience setting up Mitel IP Phones to work with W2K DHCP Server??Please help!

abakhto · 11-02-2004

I don't see anything that would imply latency or problem's with your DS3 circuit. EXACTLY MY POINTWhat do the ethernet interfaces that are connected to the end user switch/switches look like? standard faAlso from the test's you have done already were...

abakhto · 11-02-2004

Router B:controller T3 1/0 clock source line cablelength 400 description DS3 to Berwyn!!!interface Serial1/0 description DS3 to Berwyn mtu 1500 ip address 10.254.0.245 255.255.255.252 ip ospf network non-broadcast ip ospf cost 1 dsu bandwidth 44210 s...

abakhto · 11-02-2004

Is this a private point to point circuit or a VPN? A:Point-to-point DS3 Do these routers plug into switches at each end doing VLANs, etc? Yes.

abakhto · 11-02-2004

router A:Serial3/0 is up, line protocol is up Hardware is M1T-T3+ pa Description: DS3 to SLC Internet address is 10.254.0.246/30 MTU 1500 bytes, BW 44210 Kbit, DLY 200 usec, reliability 255/255, txload 2/255, rxload 4/255 Encapsulation HDLC,...

Member Since	‎05-18-2004 11:22 AM
Date Last Visited	‎04-06-2018 12:27 AM
Posts	6

User Statistics

User Activity

Asymetrical DS3??

Mitel IP Phone - W2K DHCP server

Re: Asymetrical DS3??

Re: Asymetrical DS3??

Re: Asymetrical DS3??

Re: Asymetrical DS3??