Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an Astaro 220 firewall that has to vpn tunnels created, one to a Cisco 1720 and the other to a Cisco 1711 router. The setup in the Cisco's are basically the same as far as the VPN's are concerned. The problem is that I can ping every device o...
I have a customer with a 1710 router that has 1 remote site that VPN's in and runs a dos app locally that accesses data at the host site.Would changing the packet size in the router have any effect on the speed of the connection? File transfers are ...
Hi,I have a PIX 515e that has VPN tunnels that connect to 4 other sites. 1 site has 4 users that run MS Terminal Services to our TS server. 2 of the other sites run a "kermit 95" emulation to a unix box. Each of those sites complain that the appli...
Hi,I have a PIX 515e running 6.3(3). I have a couple tunnels that terminate on Int4 and they access devices on that segment (10.82.1.0/24). I would like the remote sites to be able to access 2 devices that are on my inside interface (192.168.1.7,8) ...
I'm having issues with my PIX 515E running 6.3(3). We have several different servers with real internet 64.xxx addresses already assigned. I need to setup a outside,DMZ, inside and 1 other zone. My Internet provider has allocated one other IP for t...
I will have to put a sniffer on the network to see what the packet sizes are for local based traffic. The DOS app is AccPac and is running on the remote machine. This machine is using the windows version of pptp to establish the VPN tunnel (easier)...
Thanks for the reply. I'm not sure what you mean by "FO", but each of the tunnels has multiple clients (peers???) on the other side accessing the servers here at the home (pix) location. The pix location and site4 have keepalives set. the pix has "...
So if I add the IP segment from one end point to the access-list of the other end-point and vise-versa then traffic generated on my inside interface will go through the tunnel that is connected through my interface 4 tunnel?I will check my notes but ...
Thanks for your reply Patrick.I think I have everything covered but may be missing something, I'm also very new to this stuff.I have a couple remote offices that will tunnel into our inside segment, this works well. I have a couple clients that tunn...
Thanks for the reply. We don't own the addresses, but don't see a change for quite some time. Our DMZ servers are built and with any luck I shouldn't have to change any of them. My issue is that I have a couple of 1720 routers now looking after 4 ...
