End-to-End is an ATM OAM cell sent to the ATM interface of the far-side device...for instance:MGX -- ATM-switch -- GSRThe end-to-end would be sending the OAM to the subinterface/VC on the ATM interface on the GSR. The segment loopback is VC-based ve...
My recollection is - it's been a while - that the PAT rule takes precedence, so you will need to use an ACL to deny the 10.1.90.50/32 host then permit the 10.1.0.0/16 net.Such as:Overload rule:access-list overload deny 10.1.90.50access-list overload ...
That's accurate, although instead of 2 WIC-2Ts in the NM-2W mods you could just go for the NM-4T which provides 4 DB60 in the NM. Seehttp://www.cisco.com/en/US/partner/products/hw/routers/ps274/products_data_sheet09186a0080091b8b.htmlAs for CSU/DSU'...
