Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Firefox 93 and Chrome 96 don't want to let me access anything on webapps.cisco.com such as smart licensing portal. Site has an expired intermediate certificate. See:https://www.ssllabs.com/ssltest/analyze.html?d=webapps.cisco.com Somewhat confused ho...
I'd like to use a SPAN port in a similar way to a fiber tap.When doing something like:monitor session 1 source interface Gi1/1/1
monitor session 1 destination interface Gi1/1/2If Te1/1/2 is an SFP, e.g. GLC-LH can I connect only the TX optic on Gi1/1...
I'm trying to traffic graph the physical interfaces (Eth1/1 to 1/9) on our 2110s running FTD. Does anybody know what OIDs to use for this?
When I poll using IF-MIB I only get results for internal interfaces:
IF-MIB::ifDescr.1 = STRING: loIF-MIB::if...
Hold on. I think I've spotted the issue here. Have Cisco migrated services from webapps.cisco.com to software.cisco.com?It looks like the menu links presented to me on cisco.co.uk (which cisco.com always tries to push me over to) are looking at old l...
Thanks for the suggestion @Giuseppe Larosa , I tried it and unfortunately it made no difference. It does seem as if Ciscos require some light incoming on RX before they will bring up a monitor destination port. Rob
Capture source options are not of concern here. I am talking about patching of the monitor destination port to analyser device. Irrespective of whether a source is capturing TX, RX or both, the monitor destination only produces TX traffic from the C...
To save others the time wasting I had with this. I will share the solution I found.It seems that my problem was down to me polling the management interface rather than polling an inline interface. If I instead poll one of the inline interfaces using ...
Hi,
Thanks yes, I had already found these and have been walking them and taking punts at oids that look hopeful.
However I still seem unable to find anything that will pull information relating to the physical interfaces.
What I am after is equival...
