Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have flashed my AP's with c1200-rcvk9w8-tar.123-11JX1.tar so they can attach to my latest WLC with 7.6.100.0 The WLC has port 1 assigned as the managent port at 192.168.0.254 and port 2 as the AP manger at 192.168.0.253 while the AP is assigned 192...
I am working through a partner to get the correct software versions for the WLC and AP since my CCO account is not properly reflecting my purchases. Leave this thread open until I have successful association between devices.
I think you can cycle connectivity or power to the AP for it acquire clean RF space. I don't know how long it must be off line for this assignment initiate - Perhaps someone can point you to a specification.
According to your link to the software matrix, I need 7.0.251.2 WLC software and 12.4(23c)JA9 AP software to make this work with my existing equipment. Please provide access to this software so I can deploy this new controller.
Timed transfer of a large ISO file is an easy method. Make sure you are at the same distance from AP for both tests and your target wired system is free from other network activity. I usually do this three times on each channel I am testing to make s...
And you verified that your 802.11b > RRM > Dynamic Channel Assignment (DCA) is not blocking out channels? What kind of throughput do you get if you hard code an AP to channel 6 verses 1 or 11?
