Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, I have a problem with an asa 5515 Firewall.I created a DMZ, with the ASDM, configured route, etc.this DMZ I have to connect virtual machines. I configured the CORE cisco Vss4500 with port-channell and all. But when I connect the Vcenters s...
Hi all, have the problem with the MNGM. I have activate the SNMP, and after I don't know why, but the ip managment with others device don't working. This device is possible to ping but can't open with internetall help is good for me
Hi averyone i had the problem with the new release with 3.8.8 cisco WS-C4510R+E. After this update the allarm with "Nagios" go up, but the service working fine. I have more of 150 allarm conecting between Cisco and Nagios. But only 100 go up, and the...
Hello all,
I need your help.I have a Core C4510R catalyst. The problem I have 3 VLANs, and 20 VLAN IDs. Of this VLAN ID I want to know which is the network that is part of them.Can you help me to understand how IP of the VLAN ID?
THX
Hi Seb,I solved the problem, it was the VLAN in the Vswitch that was not configured, I did a Wr to the switch and then I turned it off. so it workedThanks for your help Regards, Salva
Hi jaderson, I thing yes, Because the my monitor Nagios don't I changed the configuration.you thing the monitor have more the 3 community configuracion ? THX
Hi Jadersonthis is the our snmp versionVSSCORE1#sh snmpChassis: FXS1751Q2QE286523 SNMP packets input0 Bad SNMP version errors56285 Unknown community name0 Illegal operation for community name supplied0 Encoding errors227571 Number of requested variab...
