About Service Informatique

Service Informatique · 04-25-2022

hello and sorry for my english, Yesterday we had trouble to connect payment terminal to my wifi, nothing to do, the terminal don't want to connect to the wifi and exactly the same with an other terminal. I have no trouble with computers on the same w...

Service Informatique · 07-29-2021

Hello and sorry for my english, I don't really understand the différence between : enable secret 5 *****username admin privilege 15 password 7 ***** I understand that "enable secret 5 ***" is the password use to pass in enable mode. 5 if for MD5"user...

Service Informatique · 06-22-2021

Hello and sorry for my english,just little question, I have 4 DNS servers to set on switchs : 10.4.0.1 10.131.0.1 10.4.0.2 10.131.0.2 if there is a difference if i put DNS like this : ip name-server 10.4.0.1 10.131.0.1 10.4.0.2 10.131.0.2 and like ...

Service Informatique · 09-07-2020

Hello and sorry for my english I have to reload 3 switch who are stacked. My first question is : how to reload all the swich in stack in one command ? and how reload one by one ?show switch detailSwitch/Stack Mac Address : 00da.551f.2f80 - Local Mac ...

Service Informatique · 06-08-2020

Hello and sorry for my bad english I have mutiples cisco controlers and 2 virtual controlers in ESXI with firmware : 8.3.150.0All my new AP don't want to join one of the 2 virtual controler. On the second one everthing is fine! I don't understand be...

Service Informatique · 04-25-2022

You sure it is better to disable it ?

Service Informatique · 07-29-2021

for the moment, i have on my switchs : "username admin privilege 15 password 7 *****"when i connect on SSH (vty 0 4) it ask for enable password

Service Informatique · 09-07-2020

yes but if i don't put this command and if i reload the stack, an other switch in network can become root of spanning-tree ? thanks

Service Informatique · 09-07-2020

you may want to increase the priority of the current master to 15 in order to increase the chance to be master again after reload use conf t switch 1 priority 15 switch 3 priority 14that command is to increase the chance of the switch 1 in stack to ...

Service Informatique · 06-09-2020

result : Cisco AP Identifier.............................. 35Cisco AP Name.................................... PAOC25Universal AP..................................... YesUniversal AP Prime Status........................ NDPCountry code..................

Member Since	‎01-24-2011 07:42 AM
Date Last Visited	‎11-06-2023 01:03 AM
Posts	30
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco WIFI and Fast transition trouble

Try to understand "enable secret ...." and "user admin password..."

Configure DNS on switch

reload switch who is root spanning tree

APs don't want to join controler

Re: Cisco WIFI and Fast transition trouble

Re: Try to understand "enable secret ...." and "user ad

Re: reload switch who is root spanning tree

Re: reload switch who is root spanning tree

Re: APs don't want to join controler