Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
With all of my IOS devices as long as I have 'ip scp enable' I can do a remote pull of the running-config from a UNIX scp client using the following syntax:
scp adminid@iosdns:running-config /tftp/router_switch/.
This will 'pull' the running config...
We have acquired a site that has a SOHO firewall with a single GLOBAL ip address. Someone got very creative with the PAT rules and setup port address translations based on not only destination port, but source address. For example if a user was com...
This is exactly what I needed thanks very much. I have a couple of questions. Do I need to create a different "nat (outside,inside) source static" for each PAT that I do, or can I stack them in the "object"? Also for the "object network public_ip"...
The only way you can do this is to use CAS or RBS (robbed bit signaling). You can't operate a PRI in a crossover configuration. I have some old MC3810s that I use for this purpose. Your best option if you have to use PRI is to get an Adtran Atlas ...
