Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am facing an issue on one of my remote office on which the lan is switch is not the root bridge and in these delegations there are facing slow performance on which I m currently investigating.after a simple diff between the config of some oth...
Hi,I have got two L2/L3 Nexus switches configured with L3 Vlan IP's add & HSRP. For the moment all the servers have got a the HSRP Virtual IP on the NEXUS as a GATEWAY. However the traffic from one vlan to another should pass through the FW and not f...
Hi,I have got two pairs of NEXUS switches 5k and 2kThe two 5 k are connected through 4 connections (port-channel) but it doesn't seems to work??The idea is to setup a server with a double path connected to n2k -> 5k and create a VPC between the two ...
Hi,I m trying to setup a Tacacs config onto my new NEXUS 5000 seriesNevertheless the authentication doesn't workActually I followed the config guide but something is not working or missingI have setup everything through VMWARE with ACS installed on a...
Hi,I have got a NAM module on my 65XX switches and since an IOS upgrade all the config has been removed.show mod X is OKsame issue on two differents switchesNormally the NAM recognise all the VLAn'sunder setup-monitor (see the screen shot)but now no...
Gents,Thanks for your answers. However how to find this mac? I m sure it's coming from the port 21 (I see it on the show span output)DELXXXXsw001#show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32768 ...
Hello Kyle,Thanks a lot for your answer. Indeed Policy-Based Routing seems to be the most easiest action to do. However I would like to try the first option but I have to analyse and check what can be done, the only vrf I have used untill know it's ...
1) Connect your mgmt link/cable onto the physical interface mgmt 0 in the NEXUS(2) show running-config | i vrfvrf context management3) configure the inteface on the vrf mgmtshow running-config interface mgmt0version 5.0(3)N1(1c)interface mgmt0 ip ad...
Hi,first of all sorry for the delay, my mgmt VLAN doesn't exist into the nexus switches nevertheless it is configured on the VRF mgmt for security issue and if your switches goes down you still have a access onto the devices1) Connect your mgmt link/...
Hi,No I do have a domain 1 (on all of my switches) but I found the answer actually on the links between the two nexusthe vpc peer-link was missingvpc domain 1 role priority 1 peer-keepalive destination 192.168.254.208 peer-gateway
