I am attempting to configure a Cisco 2901 router using IOS 15 to properly perform NAT/PAT translation between LAN and the internet connection.My Configuration:interface GigabitEthernet0/0 ip address dhcp ip nat outside ip virtual-reassembly no ip...
Hi EveryoneNat Works NowConfiguration:interface GigabitEthernet0/0 ip address 192.168.1.4 255.255.255.0 ip nat outside no ip virtual-reassembly in duplex auto speed auto no cdp enable no mop enabled!interface GigabitEthernet0/1 ip address 10.1.1.254 ...
NothingI have a 3640 an NAT works with this configuration:interface Ethernet0/0 ip address 10.1.1.253 255.255.255.0 ip nat inside half-duplex!interface Ethernet1/0 no ip address shutdown half-duplex!interface FastEthernet2/0 description ### Internet ...
ip routing enable but now ping to external not workGateway of last resort is 0.0.0.0 to network 0.0.0.0S* 0.0.0.0/0 is directly connected, GigabitEthernet0/0 192.168.0.0/24 is variably subnetted, 2 subnets, 2 masksC 192.168.0.0/24 is d...