Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I am in the process of upgrading a CallManager Software running Windows 2000 Advanced Server on MCS7845 server from version 4.1(3) sr6 to version 6.0 using a CallManager upgrade CD. it is required that i migrate the existing database on Ca...
I have a major issue that affects all services (telnet, internet etc) on my network.I have a 6509 SUP720 core switch running 2033-pk9sv-mz.122-18.SXD4.bin image and a firewall running ver 3.2(4) image inserted into a module on the switch. An IP of 20...
I have PCs connected to IP Phones on a VLAN. I have noticed failure on a few of these phones that lasts for only about 2mins. The IP phones restarts as soon as this occurs and does not affect all the phones on this VLAN. Please note that the affected...
Thanks for the reply.I have also used DMA version 6.0 and my upgrade path is to Callmanager 6.0 but i had same issue. I read a documentation sometime ago that DMA can be used for a database size of <2GB (I am currently using a database size of about ...
Currently, the FWSM suddenly stops passing traffic and the problem is resolved by power-cycling the core switch. What is the likely impact of issuing the 'firewall autostate' command on the switch?Does it have any likely service impact? Why does the ...
Thanks for the replyWhat i meant was that the failover between the active and standby SUP happens abruptly before the upgrade and after the upgrade the abrupt failover has stopped. This implies that the active and standby failover process is normal b...
IP Phone Model is 7941, 7940, 7912 and 7911It happens to same users and 2 times in a weekThe ports are set on Auto but negotiates 100/FullI have not tried connecting to other ports.Suprisingly, there is no log entry on the switch.thanks
Thanks guys,I've been able to solve the problem.The ip addresses on the phones were blocked on the proxy sever.This blocked the HTTP traffic, and the phones could not access the URL (http://x.x.x.x/CCMCIP/xmldirectory)Located at URL Parameters = URL ...
