Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everyone.I have an internal web server that I need to expose to a large range of external addresses on port 80 only, and we may or may not be able to find out all of these addresses (although we may be able to verify that these address are correct...
Hi AllWe have an L - L IPSEC tunnel between our head office and a hosting company, all works well, solid as a rock. However we now have a requirement for one of our branch offices to also run a tunnel to the hosting company, however for reasons of c...
Hi AllIm looking to replace our current Air-Cap 3501s with 3502s to ake advantage of the 5Ghz band, we currently run 16 APs over about 22000 sq feet and we have a couple of 5508 controllers.I'm based in an office right in the center of the city hence...
Were running an ASA5510 with multiple IPSEC VPN clients over a 100Mb leased line. At the moment we have about 10 active clients however we are looking at gearing up to about 100 clients.Question is, is there a known method for calculating the require...
Hi There Unfortunately I may not have a choice over port 80 or 443, although 443 would be by far the better option. The connection will be server to server, hence we cant use a client-side VPN in this case.Thanks for the PVLAN suggestion, I'll carry...
Hi ThereYou're quite correct, it was the NAT0 that was missing. Now this NAT entry has been created we have traffic flow from Branche > Hosting site.Many thank for all your help with this.Rob
Hi ThereMaking changes to any of the firewalls is isnt a problem at all, we can access the head office ASA directly, the branch office ASA via remote PC (its sits behind a second layer of NAT so cannot be accessed vis SSH etc), and the hosting fw jus...