Hi all,I need to set up network monitoring through web browsers using MRTG, over my network I had 2 Cisco 2503 router, 1 Cisco 2950 switch, but I do not reallyknow what to do? What are the setting I need do at the router and the switchand also at the...

Hi all,I need to configure a 2950 desktop switch to a 'plug and play' switch like a hub. As I understand I do not need to do much settings for that. I also understand that 2950 has a feature of CMS, which we can access the switch through a web brows...

Hi all,I need help urgently, I got a network setup as follow; on the customer end we have a cisco 2621 with a 1mb leased line connect to a 2503 (A) router, on our side a 2503 (A) and a 2503 (B) is connect to a hub, currently the 2621 cannot ping/teln...

I have a scenario of setting up a network for customer.On the customer end, we have a 2621 connected to a 2503 (we name this as PRI router) on our side with a 1Mb leased line. On event in case the leased line is down, we have 2 128k ISDN line as a b...

Hi all,I got a problem setting up a new network, I have a leased line connection between point A and point B. Point B is connected by two 128k leased line, each leased line is connected to a 2500 series Cisco router then to a Cisco Catalyst switch. A...