Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Reading the me-3400 configuration guide I've find these statments: • If no VRFs are configured then 104 policies can be configured.• If even one VRF is configured than 41 policies can be configured.• If more than 41 policies are configured then...
I've a Pix515 ver 7.05 with a vpn client access. I would to assign the address pool by a radius server. I've tried to confidure on my radius profile the following attribute cisco-avpair="ip:addr-pool=miopool" and on pix I've configured ip local p...
In the lab I have six routers connected as described below[CE-3550-12T]-[PE1-3750me]--[P1-6500sup720]--[P2-3750me]--[PE2-3750me]-[CE-3550-12G]I've enabled mpls on the PE e P routers and I've configurated an Eompls tunnel between two PE routers.(vc id...
I have configured a ipsec's tunnel from a PIX 506 to a PIX 515E.The version of software is 6.3.3The settings on both pix's isakmp polices, transform-set, crypto-map are the samebut periodically the ipsec tunnel fails.When the ipsec tunnel is down, th...
the last update..... I've inserted in the radius on user's profile the "class" attribute with the name of group-policy.In this way any users have one different group-policy with address-pool and split-acl.This is the only solution that seems to work...
The number of group-policy is important for me because I've many vpn-client sessions that refer to only one vpn-group.By radius I authenticate the user and I send to pix the name of group policy that contains the specific address-pool and the split-t...
