Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a router Cisco 801, it is connecting to internet using bri0 and gets a dynamic ip. Is there a NAT command which will allow all the traffic coming to ISDN port to be natted to some ip on the inside network.Above requirment comes because,...
I have refered to this link http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtmland configured my pix firewall for a vpn with another pix 515, everything is fine. We have a requirement now, the pe...
Hello, I have a customer with PIX 515 UR bundle. having 4 port FE card having 4 dmzs.He wants dmz2 network to access everything on inside network and vice versa. So I used nat 0 command and both ways access is working unrestricted.Is there a way to ...
One of our customer has pix 501 with 10 license, in sh ver command inside host is 10 and throughput is limited. They had only 5 users, now they have increased to 20 users.Randomly some times, for some users internet does not work and then starts wo...
Hello Kurtis,I am having the same problem but in my case the network behind pix is more simpler, it is a simple tcp ip network, with one server only,From the network I can ping and access even the shares of the laptops connecting to my network using ...
