Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to set up VPN/IPSEC where the main pop router has two points of entry into an MPLS cloud and about 50 other pop and somehow automatically load balance the VPN traffic from the main pop over two Ethernet interfaces. If the main pop has ...
Hello, Can some one please recommend the best possible configuration for ATM. We have DS3 circuits at both the ends, with ATM PVC point to point. Is it possible to run vbr-rt and vbr-nrt at once on the same interface or does it have to be one or the ...
Hi all,I'm trying to find white papers or links that would indicate how many IPSec 3DES tunnel can be done on the 2600 and 3600 routers with and without the AIM modules.Anything would help.Thanks
Hi all,That's a really funky one, I've never seen that.the router is a 2621 running 12.2-15 and part of world wide network and is the only one acting like this.I configure my ip domain-name with the our domain name, then I generate my rsa keys and th...
I'm configuring IPSEC within four sites in a fully meshed fashion. The problem that I have is one of the sites is our main hub and everything runs on a Class B network. Creating ACLs to get from one site to another is relatively simple but getting fr...
I can see your point, but what happen if one of the point of entry fails? I would like to get all the IPSEC tunnel to get recreated on the other point of entry and go back to what it was when the link comes back online. Somebody suggested creating tw...
This is fine for site 1 to main site or site 2 to main site. What about site 1 to site 2 and still be able to do site 1 to main site.This is what I had in mind: crypto map config from site-1crypto map VPNTRIAL 12 ipsec-isakmp set peer 172.16.56.1...
