Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We had trouble at an account that recently installed a concentrator to terminate remote users via IPSEC tunnels. No problem there. Problem was all users default gateway points to the trusted interface of the PIX. Inbound users once authenticated and ...
I have a customer that wants to upgrade from a GUI based platform to a 515. My understanding is that Checkpoint policies are GUI based. Is there an easy way to import them into a new box, or will I need to do a glare and stare and just manually type ...
I am trying to simulate in our lab an IPSec VPN tunnel. I have 3 cisco routers all connected via a frame relay cloud. For test purposes all frame relay addresses are real IP. The goal here is to establish a vpn tunnel between the two gateways, which...
I have a situation where a customer had PPP over direct serial connections. 3 remote sites going to a head end, all rs232 flavor. The head end has 3 serial ports on an Unix server. Each port is directly mapped to the remotes over a 56K circuit, point...
Yes, most FW can do NAT, but often are interjected into the mix after the WAN is up and running. The issue is how do you simulate in the lab a floating IP address from an ISP? ISP's will give you several IP addresses, which will be on the same subnet...
