Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Right now, I have 2 3662's with channelized T1 cards in them, running about 22 half T1's to the branch offices. I'm looking for a replacement router that can do Channelized DS3, to grow these offices to full T1's. I was looking at the 2851, but ...
I have a 3662 that I'm using channelized T1's on, but and running out of space. Looking for something that does channelized DS3 with internal or external DACS down to Frac T1's
I'm setting up a 506e to firewall an ADSL line into a company.I've done this before with the VPN, and standard NAT, but when it comes to routing protocols to the inside, can I do it all on a single IP address from the ISP?Looking at the config optio...
I'm trying to create routes for the user in user av-pairs, but I am also trying to limit access (Acl) to certain locations by what group they are in.But it seems that they don't join them together and only take the user av-pair and ingore the group s...
So, with this, I need a T3 MUX to break it down into the 28 T1's. I'm guessing this would break the T3 down the T1's, but not break the T1's apart to DS0's?Not the worst, just checking.
Not the answer I was looking for.I have the ACL's loaded into the Groups, but I wanted to put the IP routing into the users. I'm doing this because I have dialin ISDN users with subnets and I only want to define a single ACL for all the users (They ...
