About locascio

locascio · 04-17-2021

Do you know if any outage is expected when changing LACP rate from slow to fast?Any experience or information would be appreciated.Also please advise if there's any test environment lab to check this kind of configurations.

locascio · 08-20-2019

I'd like to know what is the best way to reset one apic to get access to CIMC configuration menu (F8).Is correct to reload the APIC from system>controllers? I've seen that this reloads the APIC controller (not the entire APIC system), but I don't kno...

locascio · 08-13-2019

I don't have access to APIC CIMC because the password I received is not working. The team who installed the APIC don't have another password. The following default passwords are not working either: password , Cisco1234, Cisco12345, Cisco123, Cisco, P...

locascio · 04-18-2021

Thank you both for your answers. This is ACI and it should be supported. I'll assume this change will bounce the Port-Channel and get a downtime window.

locascio · 08-21-2019

Hi,Can someone confirm if F8 will allow me to change the password even if current password is unknown?Thanks

locascio · 08-21-2019

Hi Remi,Thanks for the answer.Do you know if acidiag reboot (CLI) is equivalent to reload the apic via GUI in system>controllers>reload ?

locascio · 08-19-2019

Hi,I have the same issue, we've lost username & password. Could you fix the issue and what was the workaround it worked?Thanks

locascio · 05-14-2019

Hi Manuel,We don't have access to the CIMC interface and we can't even ping it. Interface is up and cabling is ok, but there's no input traffic.According to project manager this was working before.Can we or Cisco TAC check the current CIMC IPs someho...

Member Since	‎10-21-2017 02:09 AM
Date Last Visited	‎11-25-2021 12:36 AM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

LACP fast rate command impact

How to get access to CIMC configuration menu

APIC CIMC password incorrect

Re: LACP fast rate command impact

Re: APIC CIMC password incorrect

Re: How to get access to CIMC configuration menu

Re: Cisco Integrated Management Controller - Lost Username & Password

Re: IP Address Assignment To CIMC