Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear allI am trying to build a VPN between a checkpoint and Cisco 837 and while I can ping the ip address allocated to the dialer interface of the DSL router(Cisco 837), this router does not raise the VPN or start communication on ISAKMP port. Am I ...
Hi allAs anyone ever experienced a whole routing table refresh when just one route is unavailable. Eigrp neighbors are stable etc., and are not lost. Thanks for any advicemary
The remote site cannot establish EIGRP neighbor adjacency across the ISDN to the central site even though the central site can. Sample config of the central site and remote site attached. Any idea what is wrong?Central site!interface BRI2/0 descrip...
Yes, the entire routing table is exchanged/updated with no neighbor loss or change. This appears to happen when only 1 wan ip route is lost. This only appears to happen on the 4500 routers,. Other routers on the same lan do not experience this rou...
didn't work, I already have aaa running on this router for all telnet users. I want to disable aaa for the console port and only using the line password
The problem is that each remote customer's site run the same subnet (10.0.0.0) so of course, I will need some way of differentiating between each telnet session. Any ideas would be appreciated!
