Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone,I have my VPN concentrators set up with two AIX DHCP servers. For some strange reason, the concentrators used up all the available addresses from the first DHCP server on the list, and they do not try to get addresses from the second ...
Hello,I have a Cisco 3000 Concentrator running 4.7, and I am trying to set up WebVPN. Every time that enable HTTPs WebVPN on the public interface, I cannot longer use the private interface to HTTPs manage the Concentrator. After this, I have to acce...
Hello there,1.-Has anybody have any issues with VPN client 4.6 and ZLID (Zone Labs)? After installing the client, ZLID needs to be re-installed.2.-Does VPN client work well with proxies? I cannot establish a VPN tunnel from hotels/airports. And the ...
Hello everyone,I am getting the following error when I am trying to create any Vlan# higher than 1000:"VTP advertisements transmitting temporarily stopped,and will resume after the command finishes.Cannot set vlans in extended range.Reduced Mac Addre...
Hello everyone,I am trying to use ACS as RADIUS server to talk to an LDAP server to authenticate my VPN users. On the CiscoACS server, I have successfully mapped an External User DB (LDAP) to a CiscoSecure group. More, the VPN concentrator seems to ...
For my own experience, AT&T client and Cisco's VPN client do not like each other. Some users may claim differently, but all depends on what version of the AT&T (aka MTS) you're using. I believe 5.0.9 is fairly stable. Any way, if you do not need t...
Hi Ehirsel,I have a similar problem. However, my users get disconnected every 30mins., or 45mins. or even as constantly as 5mins. My concentrators are running 4.1.7.F and the clients are 3.6.4 and 4.6.02.0011. Any ideas how to fix the problem?Thank...
Hi Gfullage,My customer has a Windows 2003 server with Cisco's VPN client 4.6.02.0011. He is able to establish a tunnel; however, he cannot ping anything. The bytes send/receive show zeroes. The workaround is hard-code the default gateway on the V...
Hi Ehirsel,Thank you for your response. I am using NAT-T with UDP and/or TCP/IP using different ports (i.e.80) on the client. Now, I could not find anything related to NAT-T (transparent tunneling) on the VPN 3000 Concentrators (model 3030 to be ex...
Hi Bbeal,Some users at my location are running with the same problem. Actually, is not only from hotels but airports lounges as well. In my case the users cannot even establish a tunnel. I heard that some hotels/airports have poxies, and apparentl...
