I´m installing a new server with ACS 3.2, and I have a ACS 3.0 in other machine, with many users records.How I can export de database from de ACS 3.0 to ACS 3.2!?The restore option no work, because the version is different.Best Regards,
I have a 1900 series switch and two firewall apliances configured with VRRP.I have some problems with the negotiation of MAC Address.How the best pratices for configure the switch, to work with a VRRP apliance!? (Timeout, disable mac caching....etc.....
I have a Catalyst 6509 with WS-X6348-RJ-45 modules (Inline Power).How I can power up my AP1100 with inline power feature of switch!? Because this isn´t working!How de switch detects an inline power equipament to provide a power!?Regards!
I need translation ports in a communication.I read the documentation but not find any things about this.I can make this!?Example:Source: 10.10.10.1Destination: 20.20.20.1: 4000Translation:Source: 10.10.10.1Destination: 30.30.30.1: 5000Tks!
The command "switch(config) radius-server ... " doesn´t appear on my catalyst 3500. The version of Catalyst IOS is c3500xl-c3h2s-mz.120.5.WC5How I can define the RADIUS Server Ip address and port!?Regards
I have a question:In the document he says: "When the Cisco Aironet device boots up, it sends a CDP packet with information that the device is in-line power enabled, so the switch (or corresponding device) can supply the requested power" Ok, but how t...
Thanks Leo for you attention!Very strange. See below my sh version. Is realy the same version:"switch#sh verCisco Internetwork Operating System SoftwareIOS (tm) C3500xl Software (C3500xl-C3H2S-M), Version 12.0(5)WC5, RELEASE SOFTWARE (fc1)Copyright (...