Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
we have an SSID with more or less this configuration:
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/201044-802-1x-authentication-with-PEAP-ISE-2-1.html
802.1X validated with an Identity Group user (Internal users)...
yes, not in lab, in production. is a new SSID.
the SSID is a WPA2 entreprise, so is 802.1x, but if you select MAC Filtering in the SSID (security) the controller first send the authentication/authorization for the MAC, and later the 802.1x.
Is workin...
I found the solution:
In the controler SSID select MAC filtering.
authentication rules:
1- 802.1x and use:AD
2-MAB and use: indentity endpoint
in authorization:
1 rule: Identity: AD and 802.1x
2 rule: Identity: Identity group endpoint and conditi...
Hi,
I had the same problem, and finally I fonund the solution NOW!!! :):
In your sitiatuon create 2 authentication rules:
1- 802.1x and use:AD
2-MAB and use: indentity endpoint
in authorization:
1 rule: Identity: AD and 802.1x
2 rule: Identity: I...
