Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'd like to set up multiple workstations (Certain ones) to connect to particular switch ports. Can someone point me to some Documentation on how to set up a Pool using MAC Based Security?The switch is a Cisco 3548XLThanks!
I have a general question. Is there a MAX time a packet will live on a wire between 2 points? (2 sec max?)I tried to find some documentation on this but can't. TTL doesn't fully explain what I'm looking for. Seems TTL is variable. I was wondering if ...
I'm using PPP Multilink to bundle 2 T1's and on my core router (cisco 6509) I'm seeing unusually high output drops on my Multilink interface. (Not my actual serial interfaces) Que'ing is fifo. Has anyone experienced output drops and if so, what are s...
I have been looking up Documentation on the NM-ESW-16 module and the Doc's I've read indicated that it is compatible with the 2811 router but when I drill down and try to find specific examples of how to use this module, all I keep running into is do...
I was wondering if anyone might have any advice.I have a remote site that i've configured for Frame Relay. (it is a standard DS1 over a channalized DS3 back to a cisco 8510 with a frame relay DS3 adapter.)I noticed that if I send standard ICMP packet...
Thank you for your reply. I was able to resolve my issue. Thanks for you input as I learned something new. My solution was this:There was a misconfiguration on the Cisco 8510. When the Frame Relay to pvc mapping was done, a connection table was not s...
