[root@it-ciscosn-p-01 collectorlogin]# du -h 2.1G ... View more

It looks like it is scanning when I use the tcpdump command to show the network traffic. That is much easier to follow than the logs.   dh -h doesn't work, it says "no such command" I tried using the admin and root accounts.   [root@it-ciscosn-p-01 collectorlogin]# ls -larts /var/log total 6504 4 drwxr-xr-x. 18 root root 4096 Mar 12 2017 .. 8 drwx------+ 2 root root 4096 Mar 22 2017 aide 8 -rw-r-----+ 1 root utmp 172 Oct 5 2017 btmp-20171005.gz 8 -rw-r-----+ 1 root root 162 Oct 26 2017 secure-20171026.gz 8 -rw-r-----+ 1 root root 674 Oct 26 2017 maillog-20171026.gz 8 -rw-r-----+ 1 root root 918 Oct 26 2017 cron-20171026.gz 8 -rw-r-----+ 1 root root 20 Oct 26 2017 spooler-20171026.gz 8 -rw-r-----+ 1 root root 20 Oct 26 2017 daemon.log-20171026.gz 8 -rw-r-----+ 1 root root 20 Oct 26 2017 boot.log-20171026.gz 8 -rw-r-----+ 1 root root 20 Oct 26 2017 unused.log-20171026.gz 8 -rw-r-----+ 1 root root 440 Oct 26 2017 syslog-20171026.gz 8 drwxr-xr-x+ 2 ntp ntp 4096 Oct 26 2017 ntpstats 16 -rw-r-----+ 1 root root 10587 Oct 26 2017 yum.log-20180101 20 -rw-r-----+ 1 root root 13383 Oct 1 22:37 dracut.log-20171026.gz 20 -rw-r-----+ 1 root root 14469 Oct 2 17:21 yum.log-20181112 8 -rw-r-x---+ 1 root utmp 1536 Nov 5 10:12 btmp-20181112 40 -rw-rw-r--+ 1 root utmp 30336 Nov 12 21:49 wtmp-20181112 20 -rw-r-----+ 1 root root 13344 Nov 12 22:32 dracut.log-20181001.gz 396 -rw-r-----+ 1 root root 397851 Nov 12 22:32 dracut.log-20181112 4 -rw-r-x---+ 1 root utmp 0 Nov 12 22:32 btmp 8 drwx------+ 3 root root 4096 Nov 12 22:36 samba 200 -rw-r-----+ 1 root root 200499 Nov 12 22:38 dracut.log 16 -rw-r-x---+ 1 root root 10754 Nov 12 22:44 yum.log 4 -rw-r-----+ 1 root root 0 Nov 15 03:32 spooler-20181116 4 -rw-r-----+ 1 root root 0 Nov 15 03:32 unused.log-20181116 76 -rw-r--r--+ 1 root root 71494 Nov 15 18:19 dmesg.old 8 -rw-r-----+ 1 root root 1372 Nov 15 18:20 daemon.log-20181116 12 -rw-r--r--+ 1 root root 5834 Nov 15 18:22 boot.log-20181116 12 -rw-r-----+ 1 root root 4776 Nov 16 02:00 maillog-20181116 124 -rw-r-----+ 1 root root 115897 Nov 16 03:24 secure-20181116 16 -rw-r-----+ 1 root root 9244 Nov 16 03:27 cron-20181116 60 -rw-r-----+ 1 root root 56914 Nov 16 03:27 kern.log-20181116.gz 380 -rw-r-x---+ 1 root root 383076 Nov 16 03:27 messages-20181116.gz 4 -rw-r-----+ 1 root root 0 Nov 16 03:27 spooler 4 -rw-r-----+ 1 root root 0 Nov 16 03:27 unused.log 20 -rw-r-----+ 1 root root 14546 Nov 16 03:27 syslog-20181116 8 drwxr-x---+ 2 root casusers 4096 Nov 16 04:25 audit 76 -rw-r--r--+ 1 root root 71494 Nov 16 10:05 dmesg 8 drwxr-xr-x+ 6 root root 4096 Nov 16 10:05 . 68 -rw-r-----+ 1 root root 60578 Nov 16 10:05 vmware-vmsvc.log 32 -rw-r-----+ 1 root root 21529 Nov 16 10:05 vmware-vgauthsvc.log.0 8 -rw-r-----+ 1 root root 491 Nov 16 10:05 daemon.log 12 -rw-r--r--+ 2 root root 5834 Nov 16 10:08 boot.log 8 -rw-r-----+ 1 root root 2563 Nov 16 10:08 syslog 12 -rw-r-----+ 1 root root 4258 Nov 16 15:01 cron 160 -rw-r-----+ 1 root root 158058 Nov 16 15:50 secure.old 8 -rw-r-----+ 1 root root 2978 Nov 16 15:50 maillog 16 -rw-r-----+ 1 root root 1294848 Nov 16 15:55 tallylog 168 -rw-r-----+ 1 root root 161065 Nov 16 15:55 secure 20 -rw-rw-r--+ 1 root utmp 13056 Nov 16 15:55 wtmp 16 -rw-r--r--+ 1 root root 5908036 Nov 16 15:55 lastlog 184 -rw-r-----+ 1 root root 176964 Nov 16 15:56 kern.log 4136 -rw-r-x---+ 1 root root 4224465 Nov 16 15:56 messages ... View more

Hi there. I tried rebooting, applying the file again and that didn't work.   I continued using the trial option so I am in the appliance and I am able to collect data from the devices. I went to apply the registration certificate within the application and I am receiving the same error. "Unable to read the contents of the registration certificate file"   What do I need to do to get past this? I have to be honest that this whole setup has not been easy at all. I had to manually setup the appliance IP, etc from the CLI too.   Thanks. ... View more

Here you go. CSP0009031411 ... View more

Thanks for getting back to me. I checked the file and it is 12k in size. I left the file in zip format. I have tried 4 different browsers (Chrome, Firefox, Edge and IE)   How do I find the appliance ID ? ... View more

I had this issue as well and had to configure the appliance using the CLI. See this article. https://www.cisco.com/c/dam/en/us/support/docs/cloud-systems-management/common-services-platform-collector-cspc/Configure-CSPC-Appliance-via-CLI.pdf Good luck! ... View more