About bluestreak66

bluestreak66 · 12-03-2016

I have been assigned an additional /29 block of IP's and am trying to decide how to configure the router. I currently have a /29 with 1 address assigned to the interface and then the other 4 addresses are in individual NAT Pools for different Vlans. ...

bluestreak66 · 04-05-2015

I have an issue with multiple routers where a port is forwarded for an internal service, that service it no longer accessible across the vpn tunnels. Here is the part of my config in question showing one of the port forwards:ip nat inside source list...

bluestreak66 · 12-04-2016

I looks like it took a minute to take affect but it is working! If someone could take a minute to explain how this works I would greatly appreciate it. Thanks!

bluestreak66 · 12-04-2016

I added a second default route: ip route 0.0.0.0 0.0.0.0 204.xxx.xxx.xxx7 and change the pool for vlan 10 to: ip nat pool Vlan10 204.xxx.xxx.xxx8 204.xxx.xxx.xxx2 netmask 255.255.255.248 Once I make those changed I can no longer ping out from vla...

bluestreak66 · 04-06-2015

I found the answer I was looking for in another post. I needed to add a route map to the end of the port forward rule: ip nat inside source static tcp 10.14.0.20 8081 50.81.220.129 8081 route-map 100 extendableHowever it only allows for a ip address ...

bluestreak66 · 01-28-2015

For what you are doing there is no need for a layer 3 switch, keep the routing in the router. A 2960 will handle vlans just fine. If your just using 1 ap use a poe injector and save yourself alot of money. You should rethink your network, you could d...

bluestreak66 · 01-28-2015

It seems that you are using a DSL connection connected to fa0/0 although you didn't specify.If so and you are having issue with some sites and not others as well as a rather slow connection add: ip mtu 1452under interface dialer 1 and I suspect your ...

Member Since	‎01-28-2015 09:40 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7

User Statistics

User Activity

Additional Public Subnet for WAN

Port forwarded services not accessible over VPN

So I reloaded the router to

I added a second default

I found the answer I was

For what you are doing there

It seems that you are using a