Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Am trying to create a new local account on a Nexus 3048 so I can SSH to it if my Radius server doesn't work. Normally, I log in with my AD account which the switch uses Radius for authentication with that. However, when I run the command to create ...
We have two internet connections, one Comcast fiber and one FIOS. Right now, our default route goes through the Comcast fiber. I've set up two ports on the MS350, each is a trunk that connects to either the fiber or the FIOS. Then there's a VLAN f...
I'm replacing a Catalyst 3850 L3 switch with Meraki MS350-24P L3 switch. Two of the ports on the 3850 are set up with 'no switchport' commands so I can assign IP addresses to them.I don't see that as an option for the MS350. I can configure ports e...
Trying to do an upgrade on firmware for a Catalyst 9500 from 16.12.04 to newer 17.1.1. Using this article for guidance: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-12/release_notes/ol-16-12-9500.htmlThe articl...
Have an ASR1001-X router as Internet router. Got alert from Security team that ports 2001, 4001 and 9001 are open to the public on its public IP. Trying to set up an access list on the gig port for the public IP that it blocks those TCP ports. How...
Correct, command not recognized on 3048:C3048-R1-2(config)# vlan 1234C3048-R1-2(config-vlan)# remote-span^% Invalid command at '^' marker.HQN-C3048-R1-2(config-vlan)# ?media Media type of the VLANname Ascii name of the VLANno Negate a command or set ...
We have multiple VSLs on this pair.te1/1/15 <-> te2/1/15te1/1/16 <-> te2/1/16So I'm thinking try your method first of no service-policy and then service-policy with the new VSL-Queuing-Policy-1. I would try this first on te1/1/15 and te2/1/15. If t...
