Hi,We have had a third party install an instance of DCNM with the Vmware OVA file, but it seems like they never capture the GUI (admin) password during the setup stage. Does anybody know the process of rerunning the configuration script or changing t...
Hi,Do we have to configured the following commands on the physical interfaces of a port-channel or on the port-channel will be enough:ip flow ingressip route-cache flowthanksAndreas
Hi,We would like to connect a 10Gb X2 and a TwinGig X2 to the same Supervisor (WS-X45-SUP6-E) is this possible. The release note are a little vague.thanksAndreas
It seems like the password cannot be changed. The DCNM password is corrupt when using special characters when being pushed down from VMware credentials.. We had to redeploy the VMware OVA file for DCNM.
Hi Tim,We have got this working now. All that needs to be done is connect the SFP and cable and it auto detects the speed.Just a reminder that when you have redundant sups, that the uplinks on ports 3/4 on both sups become disabled and only uplinks 1...
Hi Reza,Thanks for the reply.I also have that datasheet but there seems to be conflicting documents if you see below:http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/52sg/configuration/guide/sw_int.html#wp1084402This says there is a lim...
