Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Searching for an option to create routing groups to route to two seperate ISPs -problem being the source subnets are non contiguous so is there a way to tag packets and route other than by IP
We are planning to implement a GRE tunnel through Checkpoint firewall to support Multicast. Would like feedback on security issues and IDS we could use to mitigate risk
I have a 5500 (3.6 Gig backplane)that is sustaining peak backplane utilizations (for hours at a time during a back ups) at 30% levels. It appears the daily peak % is usually 40% but the average tends to sit more near 8-10%. Are all values mentioned w...
Rebooted Cat5000 RSM IOS 12.1.19 This action caused the module to change the MAC address on the VLAN ethernet interface. The switch is networked via ATM backbone.I am not familiar with this type of behavior Should I be concerned about a security bree...
Thanks, turning Ping Sweep off as you suggested did the trick- I would have guessed this was an individual config setting but it seems to affect the overall server function.
