About dpyee

dpyee · 04-09-2003

Has any one implemented Compaq NIC teaming on MCS 7835 running 3.2.2c? If so, how did you option teaming config? Is this config supported by Cisco?

dpyee · 03-28-2003

CM 3.2.2c H323 PRI ISDN DMS100 gateway. Q.931 Disconnect cause code 0x8AFF indicates PSTN returning error from a network beyond the internetworking point. Anyone experienced anything like this? Thanks.

dpyee · 03-28-2003

Looking for suggestions on troubleshooting cause code 0x8AFF disconnect from a network beyond the internetworking point. Specific NPA NXX cannot be reached from IP Tel gateway PRI DMS100.

dpyee · 03-04-2003

CM 3.2.2c SPG, 7940 Load P00303020209. Intermittent. Single user. Pressing Messages button causes 7940 to reboot. Have replaced phone and switch port.

dpyee · 04-10-2003

Thanks for the direction.

dpyee · 03-28-2003

This solved the problem. Thanks so much. Lunch is on me.

dpyee · 03-28-2003

3660 nm-hdv-2t1 MFT h.323 gw connected to siemens pbx using ISDN DMS100. New CIPT implementation using new DID range 604-676-XXXX. I'm wondering if the remote cellular service provider serving 416-821 and 822 does not recognize 604-676 DID range?M...

dpyee · 03-28-2003

New CIPT installation and DID range. The calling NPA NXX is unreachable only from CIPT phones with new DID range. I'm wondering if the distant cellular service provider does not recognize the new DID as valid. Mar 28 16:34:09.712: ISDN Se3/0:23 Q...

dpyee · 03-17-2003

Load 300 appears to have resolved MESSAGES reloading phone. Thanks.

Member Since	‎09-27-2002 08:41 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	11

User Statistics

User Activity

MCS 7835 Dual NIC Redundancy

416 821 NPA NXX Unreachable

ISDN Q931 Cause Code 0x8AFF

7940 Messages button causes phone reboot

Re: MCS 7835 Dual NIC Redundancy

Re: 416 821 NPA NXX Unreachable

Re: 416 821 NPA NXX Unreachable

Re: ISDN Q931 Cause Code 0x8AFF

Re: 7940 Messages button causes phone reboot