Need help on logging by Cisco 3640 Router with Version 12.0(7)XK1.With an Syslog server in places, I create an access-list that permit tcp any any log and apply it on the serial interface as input access list. I notice that not all-incoming packets ...

How does an access list work. Do I need to place an access list to allow the return packets at the ingress interfaces.Local server ------(E0) local router (S0) ---------(S0) local router (E0) ------Remote server ----------HTTP traffic --> <--------...

Internet router’s access listaccess-list 100 permit tcp any gt 1023 host 123.123.123.1 eq www logaccess-list 100 deny ip any any logWith the above access list that build to allow http services to get into the web server and also with a last statem...

To ensure security for a remote router telnet function do I use the command “login local” to perform the authentication. Am I right that the command “login local” is used only with the TACACS or RADIUS implementation? as well as use in the call back...

How to clear/reset the number of match display by the policy-map or the class-map.For example "show policy-map interface e0/0" referring to. Service-policy input: drop-inbound-http-hacks Class-map: http-hacks (match-any)5 packets, 300 bytes5 minute o...