About jonathan.chapman

jonathan.chapman · 10-08-2002

I would welcome comments on the following scenario.I am seeing OSPF bad checksum error messages several times an hour between two OSPF adjacent routers. Both routers have other adjacencies established with no problems. Looking at the physical inter...

jonathan.chapman · 02-09-2004

Hi,Could you send me the VC design guide also.engineering@ciscosupport.comTIAJonathan

jonathan.chapman · 06-23-2003

Hi,You could manually assign an equal OSPF cost to each interface. That would force traffic to be shared across the links. I think Cisco's implementation of OSPF supports up to 6 equal cost paths.example interface serial 1 ospf cost 100interface se...

jonathan.chapman · 06-13-2003

Dave - Did you read the first line of my post ???. You make reference to smartjacks but you should bear in mind that smartjacks are common in N America but not elsewhere in the world. Did it occur to you that Mourad is outside of America ?.IMHO - I...

jonathan.chapman · 06-12-2003

HI Mourad,90% of the time these type of issues are within the telcos network. First of all contact your telco and ask them to investigate. On your side there are essentially three things you could try -1. Change the cables between the router and t...

jonathan.chapman · 06-12-2003

Hi Champ,What sort of debugging did you do for this problem ?. what was the status of the physical line ?. Looking through the router log what did you see that could help ?. Also where keepalives being exchanged between the router and the switch ...

Member Since	‎10-08-2002 05:43 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	21

User Statistics

User Activity

OSPF bad checksum problem

Re: Video Conferencing Design Guide

Re: ospf loadbalancing

Re: Serial line troubleshooting

Re: Serial line troubleshooting

Re: Frame relay PVC Deleted