Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
User Access Verification alcon, i get the below message. I just powered up the units and patched in the console cable and this is what I get.is this a bug, or something else? Any support would be great. (none) login: admin *************************...
We are planning our C9606R switch supervisor 1 to supervisor 2 line card swap. I have conversed with TAC and I have read the Cisco Procedures on how to perform this task. But I have a question for anyone who may have done this before. Can this be don...
this bug is not resolved in 16.12.4 for the 3650 48p sw. i just encountered it today. the work around was to move the PD to another switch in the stack. which is by no means a fixfurther testing revealed that the poe power is not available on the rem...
this is odd to me, i use the same acl on my 3850 and 3650 switches and they it works but on my C3560cx switch it wont.
there is something i'm missing but got me what it is.
my ios is 15.2(6)E1
here is my acl
mac access-list extended Samsung-VoIP per...
Flavio,thanks for the input. as of this post we have heard nothing from further up the TAC chain. We are planning to stay the course and follow the Cisco recommendations.
i found your answer here
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/hardware/install/b_c9300_hig/b_c9300_hig_chapter_01001.html
enjoy!
The switch will take the acl, and save it off. when I implement the acl it will not do what it is set to do.It is to allow only the mac address in the ranges specified and block all others. Instead it just blocks everything.
