Hello ,
I want to know the effect on applying the above command globally ,
because I read that it makes any port that have portfast that receives bpdu goes through normal STP stages ( listening , learning , forwarding )
which means that it basic...
Hello ,
I took my CCNP route exam on 28 April 2015 ,
So from my understanding I have to finish both Switching and TSHOOT exams before 27 April 2018 ,
I booked my Switching Exam on 7 April 2018 ,
So My two questions is ...
1- is 20 days are eno...
dot1x port-control force-unauthorized
My understanding of the above command is the following -
force-unauthorized—causes the port to remain in the unauthorized state, ignoring all attempts by the client to authenticate. The switch cannot pr...
Hello ,
Iam a little confused about the reason for the delay minimum and reload benefits ,
I mean If I added 60 secs minimum delay or 60 secs reload delay ,
Iam basically telling my standby router to not take over until after 60 secs ....so t...
Yes my CCNA will expire as well ,
But Iam still confused ... I thought I have to take all three exams within 3 years ...
So if in worst case scenario I passed Switching before 27th of April , but I failed to pass TShoot before 27th of April too .......
Thanks alot , it makes sense now ....so this feature blocks anyone from connecting to the port without shutting it down .....But Still in your example I would have just shutdown every port instead of going through the hassle of applying this command ...
But if the backup is not active then the whole network will be cut from the internet still ...
so you are cutting off the backup for 30 secs in order not to have an outage for 30 secs !!
that doesn't make sense to me
Still it didn't answer my main question ...
why I will want to do this ? this will delay my convergence time and keep my network dead until the delay time is over