Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Attached is the diagram for the refence, Diagaram is as follows Two router - One each router one ISP link is terminated , Each ISP has provided 8 public IP which is required from design and Natting prospective. Two FTD firewall- For Natting...
HI All,
Please find the scenario below
Two router (Router A and Router B) with one ISP link terminated on each router . EBGP is established with the ISP router and IBGP between Router A and Router B
As of now all outgoing trafffic orginated from loca...
Hi All,
When I run the command show ip ssh on the router below is the output .
show ip sshSSH Enabled - version 1.99
I believe it is supporting both version 1 and version 2.
Need to disable ssh version 1 only and allow version 2 . Kindly ...
Thanks everyone.
By default all the traffic is originating from Router A but some return traffic is coming back by Router B.
Now we want traffic 1.1.1.2 should come back by router A (link A) only. Does the below config will suffice the requir...
Thanks for the response.
Below is the current config on the secondary router
router bgp 45XXX bgp log-neighbor-changes bgp dampening network 202.19.138.0 neighbor 124.17.58.89 remote-as 94XX neighbor 192.168.10.1 remote-as 45XXX neighbor 192.168....
