About cwschultz

cwschultz · 10-21-2002

2611 at remote site is connected via T1 frame-relay to DS3's. One PVC to my DS3/core and two PVC's to parent company DS3/core. The RIP updates from parent company always arrive within 30 second interval but RIP updates from my core are intermittent. ...

cwschultz · 08-13-2004

1) Bridging is providing a "link" for non-routable packets between F0/0 and HSSI1/0. 2) I think this: You are pinging the broadcast address for the 10.10.10.0/24 subnet and since there is no "real" 10.10.10.255 address the bridge picks it up and forw...

cwschultz · 10-25-2002

The only time I have seen DLSw cause over-utilization issues is when the WAN interface is inadvertantly made part of the bridge-group servicing DLSw. If this is the case then ALL bridge traffic will span the wan and definately over-utilize it and the...

cwschultz · 10-25-2002

All we use is Atran TSU's with Cisco routers and never have any issues. If you are connecting two DTE serial interfaces together via non-telco T1, set one TSU for internal timing and the other for network. If you are using a telco provided T1 then bo...

cwschultz · 10-24-2002

We have BOOTP and DHCP with both configured as helper addresses on the LAN interfaces and the one doesn't bother the other.The BOOTP server doesn't service DHCP requests and the DHCP server doesn't service BOOTP requests.

cwschultz · 10-23-2002

Set the ip helper-address on the 2500 LAN interfaces to the address of your server.

Member Since	‎10-21-2002 08:41 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	11

User Statistics

User Activity

RIP updates not received > 5 minutes sometimes?

Re: Bridging issue, need help!!!!!

Re: DLSW peers causing congestions

Re: Adtran TSU configuration

Re: ip helper-address question

Re: DHCP Relay agent