Hi,
Please help to know, in my network 3 3850 switches stacked and it working but i just see that FAN of any one the switch is not flowing and LED status of Rear end of all 3 switches are GREEN.
I check with show env all command and everything is...
HI,
I have 3 Cisco 3850 Switch in stack and there is too much noise.
Output of Show environment all command is attached.
Please provide the support to resolve it.
HI,
4 Switches are configured in stack and its port are randomly flapping like: line protocol of interface is UP DOWN.
file is attached to see the logs.
Firmware
Please provide the resolution.
Hi,
FANs are and just stop state and version is,
Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.06.04.E RELEASE SOFTWARE (fc2)
and output of sho env all command is
Switch#sh environment all
Switch 1 FAN 1 is OK
Switch 1 FAN...
Dear,
Till now, we did not find the exact interfaces which are flapping but interfaces are random between switch stack.
and its not happening all the time like, i see log for one or two interface and sometimes i see the logs of many interfaces.
...
Dear,
End devices are computers only, even is not only gi1/0/23 and gi2/0/45 interfaces,
random interface are flapping.
and computer are shutdown and restart in shift timings.