Hi,I'm looking for a sensible value for Broadcast and Utilisation tresholds in DFM. The defaults for utilization=40% and for broadcast=15%. It seems its possible to increasing this values (broadcast=40%, ultilization=75%).Marita
I want to monitor in- and outgoing Errorscounter on any Switchports for some Catalyst 6506 and 4506 (CATOS and IOS) with MRTG.Other monitoring with MRTG for bandwith and CPU utilization are working fine.I have no practical idea which is the proper pa...
Hi,are these intelligent values? Or it's may be better to take the default thresholds. In our environment we have a average broadcast theshold from 20% Broadcast Messages by DFM.Regards
I tried it with this configuration. Would you kindly inform me whether is that the right configuartion for monitoring the errorcounter with MRTG.Target[Errorsit-device1]: 1.3.6.1.2.1.2.2.1.14.207&1.3.6.1.2.1.2.2.1.20.207:ditsnmp@183.50.155.15YLegend[...
hello,I'm using DFM 1.2 and I have updated DFM with the latest patches.Have anyone an idea to resolve this problem?I can't find anything in the CCO Bug Toolkit.ThanksMH
what error message do you get?Have you clear same Vlan on the trust. On both connection must be VLAN configured. In same cases that coult be the problem. Is one of your in tranparent mode