Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'd like to use Cisco Secure Desktop to check a registry key to decide if it's a company-client (use AnyConnect client) or not (use web-portal). I'm a bit confused if it can be solved with Host Scan entry and DAP, or if also Prelogin Policies a...
Hello,After changing the default port 443 to e.g. 442 for the WebVPN access I see the following behaviour:- clientless access mode is working as befor- full tunnel client access mode gives the following error message:"The SSL VPN to the remote peer w...
I can see the correct calling party number on the display of my 7940G. But if calls are not answered, under 'missed calls' i see only "unknown number from external call" records. Why is the number not logged?We have a 1760-V with 12.3(11)T3 and using...
Hi,When sending a rsh command on a Cisco 3640 with 12.3(10a) I got the following messages:RCMD: [514 <- 192.168.6.102:1023] recv 1022\0RCMD: [514 <- 192.168.6.102:1023] recv druch\0druch\0sh ver\0RCMD: [514 -> 192.168.6.102:1023] send <OK>RCMD: [514 ...
Hi all,We have 2 PIX 515E 6.3(3) in failover configuration(not stateful failover). The failover basically works fine. Recently we made some failover tests and had the following situation:When the failover cable is disconnected and we power-off the ac...
Thank's for the link. But my problem is not the clientless SSL VPN mode. The SVC is not working afer changing the port. Does the scv client needs to be installed again after the port change?
Windows 2000 works only as a SNTP server. You have to edit two registry key on your w2k system (server or prof. version):HKEY LOCAL MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\ParametersLocalNTP = 1ReliableTimeSource = 1 It's working on cisco r...
Hi Scott,Thank's again for your reply. We made some degradation tests in our network and noticed this behaviour of the pix. But now my question is answered. Thank's a lot.Daniel
