About kkong

kkong · 10-03-2018

In community someone indicated that Cisco IR829 uses both LTE Antenna Main/AUX to receive traffic, but use only main to upload traffic. We currently have a IR829 configured working with Main Antenna connected via controller 0 and interface cellular 0...

kkong · 10-02-2018

Hello, just happen to search for answer and found this config in reply: In one of the forum, someone indicated that for Cisco IR829 it uses both Antenna Main/AUX to receive traffic, but use only main to upload traffic. My question is do we need to do...

kkong · 10-02-2018

In IR829, is Controller Cellular 0 map to SIM0 / Antenna main 0 / Antenna Aux 0, and Controller Cellular 1 map to SIM 1/Antenna 1 and Aux 1? If so, does that mean interface Cellular 0/0 map to Antenna 0, and Interface Cellular 0/1 map to Cellular AUX...

kkong · 12-12-2017

The key to the console is not to get fooled by having it working with 3850 mini USB Com port, the IR829 driver actually will assign another port, maybe the next in sequence, for me 3850 miniUSB was on Com10, and IR829 assigned Com11. I am using Secur...

kkong · 12-05-2017

I have this problem, try using new driver per recommendation on this site: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-driversStill does not work!!! IR829 has Amber blinking light on Power LED. Connection seems f...

Member Since	‎06-13-2012 10:55 AM
Date Last Visited	‎06-11-2019 10:38 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

How to configure/optimize Cisco IR829 LTE service using both LTE Main 0 and AUX 0 Cellular Antenna?

Re: Two active LTE interfaces(Hot channels) for 899G-LTE

Re: IR809 and IR829 4G connections and antenna

Re: Can't get USB console access working for IR829GW

Re: Can't get USB console access working for IR829GW