For CCS, I only show the below support for the URMAT&T 4ESS, Technical reference 41459 QSIG (ETSI) - ETS 300 239 Euro-ISDN (ETSI) - ETS 300 120 Q.931A, Japanese ISDN I know what you are talking about, but I cannot see where 4ESS-NFAS is supported. It...

the atm vendor would give you the vpi.vci. As an example I used 1.57. So the addcon would be addcon 3.2.6.x igx 3.3.1.57

T3's do not have clocking on them. You may have a stratum traceable clock on one of the T1's in the T3 that you can select to use. Does the Adtran show any errors on it's T3? And there are two sides of the T1's , one side is the T3 side, the other si...

You can do what is called virtual trunking. Say you are using card 3, and you need to use 3 ports to do this on each side. You configure one port (port 1) as a trunk, and say you option him to use VPI 6. Then connect it with a crossover cable to anot...