About eleach

eleach · 12-08-2017

Hello, I have a Dell EqualLogic PS4210 storage array and a Dell R730 server attached to a Cisco SG200 50 port smart switch. Using vsphere vcenter I configured the host and the ports on the array, but I can't seem to get the ports on the switch confi...

eleach · 12-13-2017

Hi matt, I can ping all the IP addresses and I created a vlan group on vswitch1

eleach · 12-12-2017

Hi, I followed your directions and the outcome was the same. All ports on switch configured as vlan3 access mode. Could I be missing something in vcenter?

eleach · 12-11-2017

Hi, Yes, eth2 is the management IP for the array. I'm using the EqualLogic group manager software and all seems fine except that there is no iSCSI connection. When I change the port settings for port 41 on the switch which is connected to port et...

eleach · 12-11-2017

Thank you! Here is my configuration. Using vcenter, I configured vswitch0 with ip 192.168.101.13 and the iSCSI vswitch with ip 192.168.102.13. The Ips for the array are eth0 192.168.101.60, eth1 192.168.101.61, and eth2 172.16.101.60. The group i...

eleach · 12-11-2017

Thank you for all your input, I really appreciate it. VLAN 1 is default and I created VLAN 3 which is static. Am I missing something? Whenever I try to configure the ports for VLAN 3, the array looses it's connection.

Member Since	‎12-08-2017 08:01 AM
Date Last Visited	‎01-31-2018 12:34 PM
Posts	9

User Statistics

User Activity

iSCSI on SG200

Re: iSCSI on SG200

Re: iSCSI on SG200

Re: iSCSI on SG200

Re: iSCSI on SG200

Re: iSCSI on SG200