Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all.I have a 1760 (c1760.entservicesk9.12415T4) on which I have loaded a WORKING config AND audio files from a 2811. Athough the sh call appl sess shows the sessions running and all functionality of the tcl works fine, the audio is never heard. I ...
I have a problem connecting a PBX on a 2800 with vic-2bri-nt/te where the isdn card must be NT. I focused the problem on the tei assignment. The PBX is expecting tei from thr 2800 but it does not supply. I changed the PBX with an ISDN telephone and t...
I have a problem connecting a PBX on a 2800 with vic-2bri-nt/te where the isdn card must be NT. I focused the problem on the tei assignment. The PBX is expecting tei from thr 2800 but it does not supply. I changed the PBX with an ISDN telephone and t...
I have 2 bri interfaces, either in one router or in 2 different ones. the first has the following config:interface BRI1/0 no ip address isdn switch-type basic-net3 isdn protocol-emulate network isdn layer1-emulate network isdn static-tei 0 isdn skips...
I am facing a strange problem with 1242 APs amd Symbol wireless scanners and Zebra wireless printers. For the frequency channel I left the default config (least congested) and I had: printers working OK, scanners had signal flactuating. I changed the...
Hi,finally I changed the IOS to c1700.ipvoicek9.124.15.T7 and it works fine without changing the config! Looks like there was a bug on the enterprise services ios...Thanks everyone for their help!
yes, thanks but I had already changed it before posting it and still did not not work.Is the 1760 capable of working with the scripts or there are some issues, limitations etc?
NOT ADVANCED IP SERVICES IOS!For me it worked in 12.4.11T and 12.4.12 in both "ip voice" and "advances enterprise services", not in advanced ip services!Try with those...
Sure. Remember that you need the cable to be cross (3-4 goes to 5-6). interface BRI3/0 no ip address isdn switch-type basic-net3 isdn protocol-emulate network isdn tei-negotiation first-call isdn layer1-emulate network isdn incoming-voice voice isdn ...
Finally, if you do not give the static tei command and configure tei negotiation, the router and the telephone exchange tei and it works!Thanks for your replies!
