About dawnhc

dawnhc · 04-17-2018

Hello - I have a new C220 M4S server, whose SEL and CIMC logs are constantly filling up. The SEL fills up in under 20 minutes. It is currently on FW 3.0(3f). Here are troubleshooting steps taken so far: -Use HUU to update FW to 3.0(4a). CIMC...

dawnhc · 02-13-2017

Hello - We have deployed service profiles (from updating template) booting from a single 120 SSD with a local disk config configuration policy set to mode "Any Configuration" and Protect Configuration is enabled. These are UCSB-B200-M4 blades with Ra...

dawnhc · 09-18-2015

Is it possible to change a Global Service Profile Template from "Updating" to "Initial" or the reverse? I'm used to having this functionality in UCSM, and hoped that UCS Central would also provide this capability.Thanks!Dawn

dawnhc · 04-19-2005

The release notes for SN5428 Router Releases 3.3.2 through 3.5.2 all state that "Compaq SecurePath Manager software does not work withiSCSI and an MSA1000" in the Caveats section.The release notes for 3.5.3 make no mention whatsoever, not even as a r...

dawnhc · 03-28-2005

According to the Cisco MDS 9000 Enterprise Package Fact Sheet:"LICENSE INFORMATIONThis package is licensed per switch for all the ports in the switch. Some of the features can be used only if all the switches in the fabric have licenses for this pack...

dawnhc · 02-20-2017

Kirk - Thank you so for much for looking into this. I can confirm that the configuration includes the UCSB-MRAID-12G model, not the HE. Also, the disk is JBOD and not RAID1. Reading that same footnote about the iMegaRAID lowered my hopes. With a...

dawnhc · 02-14-2017

Thank you, this provides some hope. Once I have permission to reboot one of these blades and get into the 'Avago MegaRAID (Cisco 12G SAS Modular Raid controller) Configuration Utility', I will take a look - and hope that it is set up as Raid 0. Unf...

dawnhc · 04-20-2005

I had the exact same issue, and like you had to remove, recreate both aliases. It was very annoying, as I had inadvertently swapped the aliases for two hbas and then had to correct 8 zones.In a class one instructor indicated that it could be done, b...

Member Since	‎06-25-2004 08:03 AM
Date Last Visited	‎10-08-2025 01:03 AM
Posts	8
Total Helpful Votes Received	1

User Statistics

User Activity

C220 M4S SEL and CIMC Logs constantly filling up

Mirror B200 M4 boot SSD (on a UCSB-MRAID12G raid controller) after OS installation

UCS Central Change SP Template type from Updating to Initial?

SecurePath with SN5428 and MSA1000

Enterprise Licensing Question

Kirk -

Thank you, this provides some

Re: device-alias change