Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In recent images, there is a "Current Tx Power" menu which will show you what the 7920 is using (Menu>Network Config>802.11b Configuraiton>Current Tx Power).7920 only supports 1,5,20,50,100. Support for 100mw depends on the regulatory domain.
The major item for CCKM is the availability of the WDS. Ordinary LEAP handshake is cut to 2 802.11 messages, so will basically equal a static WEP roam. May be a little faster than 150ms at times.
Below are key commands to enable 802.1x w/ MAC authentication and CCKM (fast roaming).aaa group server radius rad_eap server 10.0.0.15 auth-port 1645 acct-port 1646!aaa group server radius rad_mac server 10.0.0.15 auth-port 1645 acct-port 1646!aaa au...
Yes. Should only use non-overlapping channels even though you have more than 3 APs. 7920 gives precedence to discovered non-overlapping channels.Recommend 2.01 sw for 7920. Just need to ensure that you tune your network for 11mbps and you have -67...
