Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone have any ideas why the phone icon on the bottom right side of the jabber client screen would be greyed out. This happens intermittently. Repeated "sign out" and "sign in" will eventually bring it back.
I have seen a lot of posts on this topic but can't seem to find one with an actual resolution. We just upgraded to the last SCCP firmware (8.1.2) for 7940G and 7960G IP phones on a 6.1.2 Cluster. We are having sparodic issues with the PCs getting an...
I have 4 6509s that I created a customized group for. Two of them became members of the group and the other two did not. The two that did not do not appear in the selection list to add them manually.All devices are in DFM.Any thoughts?
I have a scenario where I have 20 extensions in no particular order. I presently map DIDs inbound to these 20 extensions using these translation rules which works fine.voice translation-rule 1 rule 1 /^6880$/ /7250/ rule 2 /^6881$/ /7106/ ... rule 1...
Anyone now why the CAD stats would no longer be resetting? We recently added a remote Monitoring and Recording server and now this starting occuring. We can manually reset them if we restart the Rascal Service.Any ideas?
I have used the "test security-policy-match" cli command which identifies the specific policy rule a source/destination traffic pair matches against. You need to make sure you specify all fields (zone, src/dst network, protocol and ports.
We had our telephony vendor open a case with TAC and they were aware of similar issues. We are told the next release of Jabber (October 2012) is supposed to fix the issue.
Try this link from Cisco"By default, the security appliance has a self-signed certificate that is regenerated every time the device is rebooted. You can purchase your own certificate from vendors, such as Verisign or EnTrust, or you can configure the...
