Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All
We have just recently purchased 2 new Nexus 5672. There are not in production and have come installed with the following:
switch# sh ver
Software BIOS: version 2.1.7 loader: version N/A kickstart: version 7.0(1)N1(1) system: version 7.0(1)...
Hi All
Can someone please help me with the difference between CON-SNT-SLASR1AK and CON-SNT-ASR1001X?
Do I need both of these if we have a ASR1001X?
Thanks
Gordon
HI All
Can someone point me in the right direction to connect a ISCSI host (Connected to FEX) to a SAN (Connected to 5K directly)?
I need to know if any configuration is required on the 5K and Fex for this to work or just allow vlan to pass throu...
Hi All
Is there a way to breakout ports on the FEX to the downstream devices? We have a 2348UPQ FEX but most of the servers in the environment can only do 1G. Instead of connecting multiple servers to 10G ports and running them at 1G, is it possibl...
Hi All
I am new to the world of storage and need some help. I am setting up a design with Cisco 5600 and FEX. The design is completed. I plan to attach the SAN to the 5K. Please bear with me as these might be totally newbie questions.
My queries ...
HI Walter
Thanks for the reply. Well currently the SAN infrastructure is connected to a netgear switch and is running ISCSI. What I need to do is to move everything off the Netgear and move to 5K and FEX. Initially I plan to use just ISCSI and then...