About BogusM

BogusM · 01-11-2018

Hello i've problem with my Cisco WS C3750G-48TS and SFP CISCO GLC-LH-SM when i put my SFP into port 49 , my cisco says: Description: Gi1/0/49: This port has been disabled because Non Compliant Gigabit Interface Converter (GBIC) connector detected a...

BogusM · 01-15-2018

I solved the problem ... the problem was in the Unifi 10G transceiver in SPF+ i put the cisco 1G transciever and everything started as well :)) now i have 1G SFP transc. on both sides and link is OK

BogusM · 01-12-2018

hi again when i set 1000mb on unifi sfp+ - port is seems to be linked (light green), but on other side on cisco i haven't link unfortunately on cisco SFP port i cann't set speed to 1000 -in web gui i have only auto speed yes, i know that unifi hav...

BogusM · 01-12-2018

tested few configuration on other switches and i've few conclusions 1. I changed switches to CISCO 2960 and UniFi US-48 with 2 ports SFP and 2 ports SFP+ 2. connection beetwen UniFi SPF+ and Cisco SPF in different configurations - NO LINK 3. connect...

BogusM · 01-12-2018

i'll check and let you know i'll also try connect single ports without etherchannel switches are in one room and connection via RJ45 is OK (but i want connect them via SFP) sorry for my english :)

BogusM · 01-12-2018

no i don't run this command the err-disabled port was because i used to test other SFP (port has been disabled and i thougth that enables ayutomaticly :) ) no i use original cisco SFP, so i found that err-disabled ort mus be shut/no shut - so i done....

Member Since	‎01-11-2018 05:42 AM
Date Last Visited	‎01-19-2018 12:12 AM
Posts	8

User Statistics

User Activity

Problem with Cisco 3750G and SFP

Re: Problem with Cisco 3750G and SFP - SOLVED

Re: Problem with Cisco 3750G and SFP

Re: Problem with Cisco 3750G and SFP

Re: Problem with Cisco 3750G and SFP

Re: Problem with Cisco 3750G and SFP