Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
CSCwd08703 Removal of 'write mem' and 'copy run start' commands is not explainedCisco ISE 3.2 Patch 4Found one work around: Reload cmd to generate the save config prompt and then cancel the reload:reloadSave the current ADE-OS running configuration? ...
Is it recommended to remove old ISE patches? Cisco states that,"Patches are cumulative such that any patch version also includes all fixes delivered in the preceding patch versions." I've just installed Patch 8 for 2.4 and would like to remove the ol...
Just chiming in for 2024:FT was again the issue for the Clover trying to connect to our 9800-80 controllers running 17.12.4 FT Adaptive on our 5520 controllers at 8.5.182.108 worked just fine. However FT Adaptive on the 9800's did not work. I'm not s...
Also works if you are using the OpenJRE version of ASDM:From Task Manager open the file location for "Zulu Platform x64 Architecture" that ASDM is running under and then modify javaw.exe at that location as described above.For me, that location was C...
Hey Martin, I haven't yet found a way to do this for a group of APs on the 9800's because of the switch to tags, but here's how to disable 2.4Ghz for 1 AP from the cmd line: #ap name YOUR_AP_NAME dot11 24ghz shutdown (this will Admin down the interfa...
With ISE 2.4, we got an error message when trying to delete this cert (VeriSign Class 2 Secure Server CA - G3).Temporarily disabling all logging (Admin - System - Remote Logging Targets) allowed us to delete the cert even though none of our logging s...
For question #2 regarding the ",1" and ",12" see further discussion here: https://community.cisco.com/t5/other-network-architecture/bootvar-output/m-p/201692
